2017 RAM 1500
Mileage
81,132
Service Date
5/16/2024
Services Performed
- INSPECT BATTERY CONNECTIONS. CHARGE BATTERY TO FULL CAPACITY. LOAD TEST BATTERY – PASSED. PERFORM ALTERNATOR OUTPUT TEST – PASSED. CHECK FAN BELT AND ADJUST AS REQUIRED. CHECK STARTER DRAW – FAILED NEEDS NEW STARTER MOTOR CAUSING WEAK STARTING. REMOVE AND REPLACE STARTER MOTOR ASSEMBLE. CLEAN, SERVICE AND LUBRICATE STARTER MOTOR TERMINALS / CONNECTIONS. RECHECK CHARGING SYSTEM AND RECHECK FOR WEAK STARTING.
- PROGRAM SCAN TOOL FOR VEHICLE COMPUTER SYSTEM AND RUN DIAGNOSTICS. CHECK FOR CODES *SEE PRINT OUT* REVIEW CODES, REVIEW DATA, AND CHECK FOR FACTORY TECHNICAL SERVICE BULLETINS. PRESSURE TEST COOLANT SYSTEM, AND CHECK FOR WHITE SMOKE. OIL MIXING WITH COOLANT, ENGINE CYLINDER HEAD GASKETS BLOWN OUT CAUSING MISS FIRING AND WHITE SMOKE. NEEDS ENGINE CYLINDER HEADS REPAIRED. DRAIN ENGINE OIL AND COOLANT SYSTEM. DISSEMBLE / REMOVE UPPER ENGINE ITEMS, EXHAUST MANIFOLDS, FUEL INJECTORS ENGINE AND INTAKE MANIFOLD ASSEMBLE TO ACCESS ENGINE CYLINDER HEADS. REMOVE ENGINE CYLINDER HEADS AND SEND OUT ENGINE CYLINDER HEADS FOR REPAIR. CLEAN / PREP ENGINE CYLINDER HEAD SURFACE AREAS, ENGINE INTAKE MANIFOLD AREAS, AND EXHAUST MANIFOLD AREAS AS NEEDED. REINSTALL REPAIRED ENGINE CYLINDER HEADS WITH NEW ENGINE CYLINDER HEAD GASKETS, AND NEW ENGINE CYLINDER HEAD BOLTS. INSTALL NEW EXHAUST MANIFOLDS WITH NEW EXHAUST MANIFOLD HARD WEAR AND EXHAUST MANIFOLD GASKETS. REASSEMBLE / REINSTALL FUEL INJECTORS, ENGINE INTAKE MANIFOLD WITH ALL NEW GASKETS, HARD WEAR, AND O-RINGS. REMOVE / REPLACE ALL SIXTEEN SPARK PLUGS, PCV VALVE, ENGINE OIL FILTER, AND ENGINE COOLANT THERMOSTAT. FILL WITH NEW SYNTHETIC ENGINE MOTOR OIL, AND VACUUM FILL COOLANT SYSTEM WITH NEW MOPAR COOLANT. BLEED / PRIME ENGINE SYSTEM, RE PRESSURE TEST COOLANT SYSTEM, RE PROGRAM SCAN TOOL AND CLEAR ENGINE CODES. TOP OFF ALL OTHER FLUID LEVELS, AND ROAD TEST.
JOSEPH L. gave our service a 5 star review on 5/16/2024
